DIG 50 ft. Drip Irrigation Line Watering Kit with Riser Conversion

One of the easiest drip irrigation systems to install, the DIG 50 ft. Drip-Line Watering Kit with Riser Conversion keeps plants lush and healthy. Simply lay out the drip-line watering kit and connect it to your water source. The watering kit includes 50 ft. of dripline and is ideal for narrow plantings, roses, flowerbeds and groundcover. Each dripper in this watering kit is pressure compensating between 10 and 45 PSI for consistent, reliable flow.

• Complete kit; covers up to 150 sq ft (can be easily expanded up to 600 sq ft)
• Using drip irrigation, water is delivered directly to plant roots, resulting in less water loss to evaporation and wind
• Drip irrigation promotes healthy plant growth by maintaining optimum moisture levels in the soil and delivers water only where needed
• Watering kit used above ground and can be covered with mulch
• Pressure compensating drippers on watering kit provide consistent flow over the length of the dripline
• Easily expanded and customized watering kit has maximum incoming operating pressure of 100 PSI
• Use around building foundations to maintain moisture in heavy soils and prevent slab damage
• Watering kit can be connected into a 1/2 in. sprinkler riser or faucet
• Includes cylindrical pre-inserted 1 GPH pressure compensating (PC) drippers every 18 in. for quick and easy installation, starting it from a 1/2 in. sprinkler riser
• Dig Corporation warrants products to be free from defects in material and workmanship for a period of three years from date of purchase; Does not cover damage resulting from accident, misuse, neglect, modification, improper installation or subjection to line pressure in excess of 50 lb. per square inch
• Extends only to original purchaser of the product for use by the purchaser; Does not cover batteries or any malfunction of the product due to battery failure
• Obligation of company under this warranty is limited to repairing or replacing at its factory this product which shall be returned to the factory within three years after the original purchase and which on examination is found to contain defects in material and workmanship
• Kit has preset pressure of 25 PSI and up to 10 GPM